Flail [411-160-100]
€13.42
SKU
411-160-100
The 101mm flail blade for the Trimax flail mowers. 101 x 57 x 16.5mm. Replace in full sets to maintain rotor balance. Quantity varies by mower width.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Ezeemow - S2
- Mowcraft - S1
No spare parts instructions available for this product.
The replacement flail for Trimax flail mowers. Flails are a routine service item. Replace as a complete set to keep the rotor balanced.
If you have an Ezeemow FX (the current model), the correct flail is 411-160-105. If you have an Ezeemow S1, the correct flail is 411-160-000.
- 101 x 57 x 16.5mm
- Hardened steel for extended service life
- Replace as a complete set to maintain rotor balance
- Genuine part. Maintains your Trimax warranty
Flails per mower
This table covers the most popular Trimax models. If your mower is not listed, check the cutting system section of your parts manual for the correct quantity.
| Mower | Width (cm) | Flails per mower |
|---|---|---|
| Ezeemow S2 | 115 | 24 |
| Ezeemow S2 | 135 | 28 |
| Ezeemow S2 | 155 | 32 |
| Ezeemow S2 | 185 | 40 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Flail Mounting Bush - Trimax Specification - 10mm | 402-060-750 | 1 per flail | Locates the flail on the carrier pin. Replace at every flail change. |
| Bolt - M10 x 40 Trimax Spec | 305-210-403 | 1 per flail | Flail mounting bolt. |
| Nut - Plain M10 | 307-210-013 | 1 per flail | Retaining nut. |