Flail - Spring Steel Flail - Warlord - Trimax Specification - [411-160-200]
€23.31
SKU
411-160-200
The spring steel rotor flail for the Trimax Warlord S1 and S2. Replace in full sets to maintain rotor balance. Quantity varies by mower width.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Mulchmasta - S1
- Warlord - S1
- Warlord - S2
No spare parts instructions available for this product.
The spring steel rotor flail used on the Trimax Warlord S1 and S2. Spring steel construction allows the flail to deflect on contact with hard objects before returning to its cutting position. Replace as a complete set to maintain rotor balance. Running a partial set increases vibration and accelerates rotor bearing wear.
- Spring steel construction for impact deflection
- Replace as a complete set to maintain rotor balance
- All Warlord S1 and S2 mowers are single deck
- Genuine part. Maintains your Trimax warranty
Flails per mower
This table covers the most popular Trimax models. If your mower is not listed, check the cutting system section of your parts manual for the correct quantity.
| Mower | Width code | Flails per mower |
|---|---|---|
| Warlord S1 - S2 | 145 | 20 |
| Warlord S1 - S2 | 175 | 24 |
| Warlord S1 - S2 | 205 | 28 |
| Warlord S1 - S2 | 235 | 32 |
| Warlord S1 | 265 | 36 |
| Warlord S1 | 296 | 40 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Nut - Nyloc M16 - Trimax Specification | 307-216-053 | 1 per flail | Replace the nyloc nut at every flail change. |
| Bolt - M16 x 60 - Trimax Specification | 305-216-805 | 1 per flail | Replace only if the bolt head or threads are damaged. |